|
| |
Job Posting of The Month
PROJECT QUALITY ENGINEER
EDMONTON, ALBERTA
Tracer
Industries Canada Limited, a Division of Tyco Thermal Controls, is an
Engineering, Procurement and Construction (EPC) firm that specializes in Heat
Management Systems for the Oil and Gas Industry.
We are currently seeking a Project Quality Engineer for an EPC project.
The position will be based in our Canadian Head Office located in
Edmonton, Alberta.
Responsibilities:
- Facilitate effective implementation of established Project Rework Reduction Tool.
- Coordinate incoming and outgoing RFI (request for information) process for efficient resolution.
- Assist with the development and review of Project Quality Management System documentation, including policies, procedures, process maps and forms.
- Facilitate the issuance and revision control of the above documents.
- Coordinate and communicate on new and forthcoming changes to management system processes and procedures and the changes to documentation that these changes require,
- Provide meaningful and timely statistics and recommendations to management to ensure continued improvement of Management System.
- Act as a resource to Project Management and employees on issues pertaining to Quality.
- Assist with the implementation of the Tracer Quality program and monitoring the program’s effectiveness.
- Provide guidance and mentoring on quality initiatives and act as a resources to individuals.
- Provide expertise and training for personnel on auditing processes and procedures,
- Coordinate and assist with the scheduled audits of the Quality Management System and monitor the results of the audit program to ensure that Tracer meets or exceeds quality system requirements.
- Identify and organize training needs as they relate to the quality management system for all employees.
Qualifications:
- At least 5 years of relevant work experience with increased responsibilities in the engineering and industrial construction sector with at least 2 years direct experience in a quality management system role.
- Undergraduate degree in Engineering preferred.
- Certified Six Sigma Green Belt or equivalent experience with DMAIC methods. Six Sigma Black Belt preferred.
- Thorough working knowledge of Quality Methodologies, Cost of Quality, SPC, Statistical Decision Making, Continuous
Improvement Techniques Quality Management System requirements, (ISO 9000 series).
- Excellent communication skills, both verbal and written, and the ability to interface effectively with engineering, sales,
administration and construction groups,
- Good conceptual, analytical, problem solving and organizational skills,
- Proficient with Microsoft Office Programs,
- A “hands on” individual, who enjoys challenge, is capable and dedicated to getting the job done with minimal support and
direction.
Tracer
offers a comprehensive employee benefit package.
Compensation will be based on experience and qualifications.
Please
send your resume to careers@tracerindustries.com,
with “Project Quality Engineer” in the subject line.
___________________________________________________________________________
JRS Consultants-3rd Party Recruiter
Contact Personnel: Caprice Black
E-Mail: cblack@jrsconsultants.net
Brief Description about the company: World’s largest producer of elastomeric seals and custom molded products with over $8B in sales.
Position Title: MFG PROCESS MOLDING ENG
Position Location: Edmonton, Alberta
Job Description:
To develop prototype RUBBER MOLDED products / processes to support new business and achieve technology goals. Coordinate customer designs and tooling specifications for molding press requirements.
To develop and launch flawless new production products/processes by determining optimum, capable, and cost effective processes, which achieve strategic manufacturing targets.
Production support with continuous improvements, increase productivity, process troubleshooting, scrap & waste reduction and QA coordination.
Assure tooling and equipment specs for flawless and successful product launches into production.
Coordinate BOM, APQP and PFMEA standards.
Interact extensively with customers at their plant sites as well as in house customer visits.
BS. Degree in Mechanical Engineering, Chemistry, Chemical Engineering or Polymer Science
4 to 8 years minimum molding experience with medical, aerospace or automotive products..
Experience with process implementation, troubleshooting and continuous improvements.
Knowledge of BOMs, APQPs & FMEAs.
Knowledge of BOMs, APQPs & FMEAs.
Apply through E-mail: cblack@jrsconsultants.net
_______________________________________________________________
Quality Manager
Stewart Weir is a rapidly growing organization that provides
consulting services in geomatics and engineering to local, provincial, national
and international markets. Headquartered in Sherwood Park, Alberta and with over
190 employees, Stewart Weir continues to develop and expand its regional offices
around the globe.
Stewart Weir seeks a highly motivated self-starter to fill
the position of Quality Manager. Reporting to the Chief Business Officer, the
Quality Manager will oversee the continued implementation, enhancement and
maintenance of the organization’s ISO 9001:2000 based Quality Management
System.
The ideal candidate will have technical qualifications and a
minimum of two years experience in an ISO compliant work environment. Other
assets include lead auditor designation, previous supervisory experience,
teamwork skills and a good working knowledge of Microsoft Office.
Qualified applicants please submit your resume in confidence
to: sarah.pihrag@swg.ca
or fax to (780) 410-2589.
Stewart, Weir and Company Ltd.
#140, 2121 Premier Way
Sherwood Park, AB T8H 0B8
www.swg.ca
__________________
Company:
Flowserve Canada Corp.
Contact name:
Mary Harris – Manager Human Resources, Canada
Apply by e-mail:
Canada-HR@flowserve.com
Title:
Quality Engineer
Job Description:
Responsible
for maintaining and improving quality system that conforms to ISO 9001.
Duties include, but are not
limited to, performing internal quality audits, facilitating continuous
improvement
projects, performing statistical analysis, promoting quality initiatives,
training
personnel and
addressing quality issues.
Qualifications:
Technical Degree or Diploma.
3-5 years Quality Assurance experience in an industrial
manufacturing environment an asset.
Certified Quality Auditor Training combined with audit
experience.
Excellent communication skills.
Must be proficient with Microsoft ® Office Products.
Proactive and organized.
____________________________________________________________________________________________
|
JOB
DESCRIPTION
|
|
|
JOB TITLE:
|
Project
Quality Management System Lead Auditor
|
POSITION NUMBER:
|
|
|
WORKING TITLE:
|
Project
QMS Lead Auditor
|
INCUMBENT:
|
|
|
DEPARTMENT:
|
Engineering
|
DATE CREATED:
|
|
|
LOCATION:
|
Edmonton
|
PROPOSED GRADE LEVEL:
|
|
|
REPORTS TO:
|
Supervisor,
Engineering Quality Management
|
GRADE LEVEL:
|
|
|
Primary
Focus
|
|
|
Leads
and mentors project quality coordinators.
Responsible for the organization,
planning and direction of project quality audits.
Provides
pipeline system-related engineering and construction quality management
expertise for the execution phase of Enbridge’s mainline capital
pipeline projects in Canada as required, including all issues related to
quality management systems (QMS) for project related work processes within
Enbridge, for engineering firms providing services to support the projects
and for mainline and station construction contractors.
The
scope of practice is firstly focused on the safe, efficient and effective
execution of Pipeline Projects, facilitating compliance with project
requirements through the development and effective implementation of
project quality management systems. In the broader context the role also
provides technical support and participates in the development of pipeline
construction programs; advises on the introduction of new technologies,
methods and products; and mentors, trains and instructs other personnel on
quality related matters.
|
|
Specific
Accountabilities
|
|
|
·
Fully
accountable for field audit assignments being completed within financial
and scheduling constraints.
·
Accountable
for the quality, cost, scope and schedules of all work performed by the
field auditors.
·
Accountable
to report to project execution teams monthly on compliance with Project
Procedures, design standards and regulatory requirements and remedial and
preventive actions.
·
Works with
the project health safety and environmental (HSE) team to ensure that all
areas of the project’s operations conform to applicable Enbridge,
regulatory and contractual HSE obligations
·
Works with
appropriate quality managers to ensure that project quality management
plans and dependent systems and procedures are developed and implemented
to assure compliance with project regulatory and contractual requirements.
·
Assess the
effectiveness of quality planning to ensure that process controls and
requisite product and service verification and inspection arrangements are
established and adequately resourced for the project.
·
Responsible for production of
Project close-out quality summary.
·
Based upon Enbridge and
Industry experience, responsible to identify improvements to project
execution practices to support EPI continuous improvement initiatives.
|
|
Scope
|
|
|
·
Audit functions include
safety, environmental, welding, NDE, coatings and hydrostatic testing.
·
Directs and
assist in the implementation of quality management systems for pipeline
and station construction.
·
Assists and
provides advice regarding the development and management of all
construction contractors’ quality plans.
·
Confirms an
adequate level of design control, verification, validation and review.
·
Supports
all QMS activities in the field during construction.
·
Confirms
appropriate closure of all non-conformance reports generated during
construction.
·
Maintains
up-to-date knowledge of pipeline related technology, regulatory
requirements, engineering and construction practices and pipeline project
control systems, and identifies opportunities for improved quality
management and project execution strategies.
·
Responsible for ensuring that
throughout the audit execution process, a high level of communication is
maintained with both internal and external stakeholders.
|
|
Contacts
|
|
|
·
Reports to the Manager of
Pipeline Design.
·
Interfaces with multiple
internal stakeholders such as the managers of technical teams,
procurement, HSE.
·
Interfaces directly with the
quality managers of multiple external stakeholders such as engineering
design firms and construction contractors.
|
|
Working
Conditions
|
|
|
·
Office environment with
substantial travel to construction sites, manufacturer’s facilities and
regulatory agencies.
·
Exercises considerable
diplomacy dealing with internal and external stakeholders to achieve
objectives of this position.
|
|
Knowledge, Skills
& Abilities
|
|
|
·
Prefer ISO 9000 certified
lead auditor or ASQ Certified Quality Auditor.
·
Prefer a minimum of 5 years
of progressively responsible pipeline-related experience, including at
least two years of project quality management.
·
Experience and competence in
the design and construction of large cross-country transmission pipelines.
·
Detailed familiarity with
the ISO 9000 series of standards.
·
Strong technical knowledge
of project quality management techniques and tools, and of the principles
and practices of quality management and the implementation and improvement
of management systems.
·
Ability to consistently
solve complex technical, contractual and management problems as they arise
in a timely and effective manner.
·
Working knowledge of
regulatory requirements in Canada related to pipeline design and
construction.
·
Excellent
leadership, conflict resolution and interpersonal skills.
·
Knowledge of standard
administrative processes as well as human resources management.
|
|
|
JOB
DESCRIPTION
|
|
|
JOB TITLE:
|
Project
Quality Coordinator
|
POSITION NUMBER:
|
|
|
WORKING TITLE:
|
Project
Quality Coordinator
|
INCUMBENT:
|
|
|
DEPARTMENT:
|
Project
Execution Team
|
DATE CREATED:
|
|
|
LOCATION:
|
Edmonton
|
PROPOSED GRADE LEVEL:
|
|
|
REPORTS TO:
|
Manager,
Pipeline Design
|
GRADE LEVEL:
|
|
|
Primary
Focus
|
|
|
Provides
pipeline system-related engineering and construction quality management
expertise for the execution phase of Enbridge’s mainline capital
pipeline projects in Canada as required, including all issues related to
quality management systems (QMS) for project related work processes within
Enbridge, for engineering firms providing services to support the projects
and for mainline and station construction contractors.
The
scope of practice is firstly focused on the safe, efficient and effective
execution of Pipeline Projects, facilitating compliance with project
requirements through the development and effective implementation of
project quality management systems.
In
the broader context the role also provides technical support and
participates in the development of pipeline construction programs; advises
on the introduction of new technologies, methods and products; and
mentors, trains and instructs other personnel on quality related matters.
|
|
Specific
Accountabilities
|
|
|
·
Work with
the project health safety and environmental (HSE) team to ensure that all
areas of the project’s operations conform to applicable Enbridge,
regulatory and contractual HSE obligations
·
Work with
appropriate quality managers to ensure that project quality management
plans and dependent systems and procedures are developed and implemented
to assure compliance with project regulatory and contractual requirements.
·
Assess the
effectiveness of quality planning to ensure that process controls and
requisite product and service verification and inspection arrangements are
established and adequately resourced for the project.
|
| Scope
|
|
|
·
Directs and
assist in the implementation of quality management systems for pipeline
and station construction.
·
Assists and
provides advice regarding the development and management of all
construction contractors’ quality plans.
·
Confirms an
adequate level of design control, verification, validation and review.
·
Supports
all QMS activities in the field during construction.
·
Confirms
appropriate closure of all non-conformance reports generated during
construction.
·
Maintains
up-to-date knowledge of pipeline related technology, regulatory
requirements, engineering and construction practices and pipeline project
control systems, and identifies opportunities for improved quality
management and project execution strategies.
|
|
Contacts
|
|
|
·
Reports to the Manager of
Pipeline Design.
·
Dotted line reporting
relationship to Project Quality Management
System Lead Auditor, Engineering Department.
·
Interfaces with multiple
internal stakeholders such as the managers of technical teams,
procurement, HSE.
·
Interfaces directly with the
quality managers of multiple external stakeholders such as engineering
design firms and construction contractors.
|
|
Working
Conditions
|
|
|
·
Office environment with
moderate travel to construction sites, manufacturer’s facilities and
regulatory agencies.
·
Exercises considerable
diplomacy dealing with internal and external stakeholders to achieve
objectives of this position.
|
|
Knowledge, Skills
& Abilities
|
.
|
|
·
Prefer ISO 9000 certified
lead auditor or ASQ Certified Quality Auditor
·
Prefer a minimum of 5 years
of progressively responsible pipeline related engineering experience,
including at least two years of project quality management.
·
Experience in the design and
construction of large cross-country transmission pipelines.
·
Detailed familiarity with
the ISO 9000 series of standards.
·
Strong technical knowledge
of project quality management techniques and tools, and of the principles
and practices of quality management and the implementation and improvement
of management systems.
·
Ability to consistently
support complex technical, contractual and management problems as they
arise in a timely and effective manner.
·
Working knowledge of
regulatory requirements in Canada related to pipeline design and
construction.
·
Excellent conflict resolution
and interpersonal skills.
·
Knowledge of standard
administrative processes
|
|
|
|
|
|
|
|
______________________________________________________________________________________
Get
your qualified quality personal for free through ASQ Edmonton chapter; for
further information contact Sherif Labib Placement Chair @ hutta@hotmail.com
or 905-9618
_______________________________________________________________________________________
Note: Job postings are published
for ASQ Edmonton members benefits, please directly contact the organization
for all further information...
|
American Society for Quality (ASQ)
Edmonton Section 